Bola de acero fundido
Suministramos bolas de acero fundidas con un amplio rango de especificaciones y de acuerdo a los requerimientos del cliente.
| Composición química. Especificaciones generales (consulte con nosotros la aleación a medida) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| % | Type | C | Si | Mn | Cr | S | P | Mo | ||
| High Cr | ZQCr20 | 2.0 - 3.2 | ≤1.0 | ≤1.5 | 19 - 22 | ≤0.08 | ≤0.06 | ≤1.0 | ||
| ZQCr17 | 2.0 - 3.2 | ≤1.0 | ≤1.5 | 15 - 18 | ≤0.08 | ≤0.06 | ≤1.0 | |||
| ZQCr11 | 2.0 - 3.2 | ≤1.0 | ≤1.5 | oct - 13 | ≤0.08 | ≤0.06 | ≤1.0 | |||
| Low Cr | ZQCr2 | 2.1 - 3.5 | ≤1.0 | ≤1.5 | 1.5 - 3.5 | ≤0.08 | ≤0.06 | ≤1.0 | ||
| Propiedades mecánicas y microestructuras | ||||||||
|---|---|---|---|---|---|---|---|---|
| Item | Type | HRC | Ak (j/cm2) | Microstructure | Times of Falling Balls | Wear rate (g/Tn) | Breakage | |
| High Cr | ZQCr20 | 55-65 | ≥50 | ≥4.0 | M + C | ≥8000 | ≤25 | ≤0.5 |
| ZQCr17 | 55-65 | ≥50 | ≥4.0 | |||||
| ZQCr11 | 55-65 | ≥50 | ≥4.0 | ≤30 | ||||
| Low Cr | ZQCr2 | ≥45 | ≥4.0 | M + C | ≤1.0 | |||
| Tamaños | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Item | 0 mm | |||||||||||||
| 17 | 20 | 25 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | |
| Tolerance | 1 | 2 | 3 | 3.5 | ||||||||||
| - 1 | - 1 | - 1 | - 1 | |||||||||||
| 0 max. - 0 min. | ≤1.0 | ≤2.0 | ≤3.0 | ≤4.0 | ||||||||||